Potentiostat to Measure I-V Curve

  • Price:


  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:


  • Validity to:

    Long-term effective

  • Last update:

    2018-09-27 20:24

  • Browse the number:


Send an inquiries

Company Profile

Wuhan Corrtest Instruments Corp.,Ltd

By certification [File Integrity]







Website:http://www.csechem.com/ http://kst2018.sin-ko.com/


CS350 single channel potentiostat galvanostat can be used for I-V measurement. It contains a fast digital function generator, high-speed data acquisition circuitry, a potentiostat and a galvanostat. With high performance in stability and accuracy with advanced hardware and well-functioned software, it is a comprehensive research platform for batteries, corrosion electrochemical analysis, sensor, life science and environmental chemistry etc.



(1) Reaction mechanism of Electrosynthesis, electrodeposition (electroplating), anodic oxidation, etc.

(2) Electrochemical analysis and sensor; 

(3) New energy materials (Li-ion battery, solar cell, fuel cell, supercapacitors), advanced functional materials, photoelectronic materials;

(4)Corrosion study of metals in water, concrete and soil etc;

(5) Fast evaluation of corrosion inhibitor, water stabilizer, coating and cathodic protection efficiency.

It can do the common electrochemical measurements such as the I-t curve(potentiostatic), I-V curve(linear voltammetry), M-S curve(EIS vs. potential).



For I-V curve measurement, the technique of linear sweep voltammetry (LSV). Set the initial and final potential, and the scan rate. By this method, the I-V curve can be obtained.



CS studio software provides users a versatile smoothing/differential/ integration kit, which can complete the calculation of peak height, peak area and peak potential of CV curves.

CS Studio software can achieve real time saving of the measuring data. The data can be automatically saved even in case of sudden power off.

CS studio kit has a built-in versatile timing policy for combined measurements, which can facilitate the automation of experiments and save time.

Battery analysis: charge & discharge efficiency, capacity, specific capacitance, charge & discharge energy etc.

EIS analysis: Bode, Nyquist, Mott-Schottky plot


1. Impedance (EIS)

CS350 potentiostat applies correlation integral algorithm and dual-channel over-sampling technique, and has strong anti-interference ability. It is suitable for EIS measurements of high-impedance system (>109Ω, such as coating, concrete etc.). It can also be used to obtain Mott-Schottky curve and differential capacitance curve. During test, the software can display real-time open circuit potential(OCP) without entering.


EIS of AA6063 Al alloy in Ce3+ containing 3% NaCl solution

Polarization curve of Ti-based amorphous alloy & stainless steel in 3%NaCl solution

2. Polarization curve

It can complete linear polarization curve and Tafel plot measurements. The user can set the anodic reversal current (passivation film breakdown current) of the cyclic polarization curve to determine material’s pitting potential and protection potential and evaluate the its susceptibility to intergranular corrosion. The software employs non-linear fitting to analyze polarization curve, and can make fast evaluation of material’s anti-corrosion ability and inhibitors.


3. Voltammetry

It can do the following electroanalysis methods: LSV, CV, SCV, SWV, DPV, NPV, ACV, Stripping voltammetry etc. It integrates calculation of peak area, peak current and standard curve analysis.


LSV curve: mesoporous carbon material in 0.1M KOH       CV curves of PPy supercapacitor in 0.5 mol/L H2SO4

4. Electrochemical Noise

With high-resistance follower and zero-resistance ammeter, it measures the natural potential/current fluctuations in corrosion system. It can be used to study pitting corrosion, galvanic corrosion, crevice corrosion, and stress corrosion cracking etc. Through noise spectrum, we can evaluate the inducement, growth and death of metastable pitting and crack. Based on calculation of noise resistance and pitting index, it can complete localized corrosion monitoring.

Electrochemical noise of low-carbon steel in 0.05mol/L Cl-+0.1mol/L NaHCO3

5. Full floating measurement

CS350 potentiostat uses full-floating working electrode. It can be used for autoclave electrochemical measurements, on-line corrosion monitoring of metallic components under the ground (rebar in concrete, etc.)

6. User-defined methods

CS350 potentiostat supports user-defined combination measurements. The user can set cyclic  timing measurements of an electrochemical method or several methods.

We are able to provide API functions and development examples, which facilitates some users’ requirements for secondary development and self-defined measurements.



Techniques / electrochemical methods





Stable polarization

Open Circuit Potential (OCP)

Potentiostatic (I-T curve)


Potentiodynamic(Tafel plot)


Transient polarization

Multi-Potential Steps

Multi-Current Steps

Potential Stair-Step (VSTEP)

Galvanic Stair-Step (ISTEP)

Chrono methods

Chronopotentiometry (CP)

Chronoamperometry (CA)

Chronocoulometry (CC)


Cyclic Voltammetry (CV)

Linear Sweep Voltammetry (LSV)

Staircase Voltammetry (SCV) #

Square wave voltammetry (SWV) #

Differential Pulse Voltammetry (DPV)#

Normal Pulse Voltammetry (NPV)#

Differential Normal Pulse Voltammetry (DNPV)#

ACvoltammetry (ACV) #

2nd Harmonic A.C.Voltammetry (SHACV)


Differential Pulse Amperometry (DPA)

Double Differential Pulse Amperometry (DDPA)

Triple Pulse Amperometry (TPA)

Integrated Pulse Amperometric Detection (IPAD)


EIS vs Frequency (IMP)

EIS vs Time (IMPT)

EIS vs Potential (IMPE)(Mott-Schottky)

Corrosion  test

Electrochemical Potentiokinetic Reactivation(EPR)

Electrochemical Noise(EN)

Zero resistance Ammeter (ZRA)

Battery test

Battery charge and discharge

Galvanostatic charge and discharge(GCD)


Data Logger

Electrochemical stripping/deposition

Bulk electrolysis with Coulometry (BE)